Ronstar : Model Classic Specification Text

Tripod Barriers "Ronstar - classic"
Specification Text

Pos. 1.0	Ronstar classic Tripod Barriers see datasheet -Ronstar-half height turnstile
Construction Stainless steel housing with space reserved for card reader, terminals and costumer installations. Stainless steel crossbars
Operation Locking opens even "under pressure" (does not jam when force applied to barrier rails) Entry direction electrically controlled by an access control system Entry direction electrically controlled by an access control system or by push button Servo positioning drive moves the tripod gently into the next rest position. If no one passes through, release is cancelled again after an adjustable period. (Time out)
In the event of power failure both directions free, cross bar tilts down and releases escape route.
When power is restored automatic resetting Or resetting after confirmation by push button control (e.g. in connection with control desk or console)
Electrical Equipment Control integrated in the unit Supply: 230 V AC 50 Hz Different voltages available on request.
Computer Interface RS232 interface is available for direct communicate with computer, building automation system and/or security system.
Reader interface Compatible with access control systems standards. Special interfaces, signal exchange with building services automation and connection of costumer's operating elements available on request.
Finish: stainless steel satin finish, other finish on request.
Installation: on finished floor (FFL)
Model Classic \| Model Classic (Drawings)